LED PCB Manufacturing in the UK
What is an LED PCB?
An LED PCB is a circuit board that holds your LEDs. It also needs to remove heat from the LEDs quickly enough to help keep their temperature within the recommended limits. At PCB Company, we specialise in LED PCB manufacturing in the UK, from prototype boards to full production runs. We use aluminium and metal-core PCBs to help manage heat and support reliable LED performance.
When producing a lighting product, your LED PCB can make or break its performance. If the design or material is unsuitable, the LEDs may dim sooner than expected. Get it right, and your fitting is more likely to perform to specification.
Heat can shorten LED life:
LEDs produce heat when they are operating. This heat builds up at the LED junction, where excessive temperature can affect performance and lifespan. As a general rule of thumb, a 10°C rise in junction temperature can significantly reduce an LED’s lifespan. However, the exact effect depends on the LED and its manufacturer’s specifications. Excessive heat can also reduce light output or cause colour shift.
LEDs need a circuit board that helps conduct heat away from them. Standard FR-4 PCBs have relatively low thermal conductivity—often quoted at approximately 0.3 W/m·K—so a different board construction may be more suitable for higher-power LED applications. The right choice depends on the complete design, not just the material’s thermal conductivity.
Types of LED PCB material
Different LED PCB materials suit different applications. The figures below are indicative; actual performance depends on the material grade and board construction.
Material | Indicative thermal conductivity | Typical applications |
FR-4 | Approximately 0.3 W/m·K | Lower-power LED applications where heat generation is limited. It is often the lowest-cost option. |
Aluminium MCPCB | Approximately 1.0–3.0 W/m·K, depending on the dielectric | Many LED lighting applications, including downlights, panels and LED strips. |
Copper-core PCB | Generally higher than aluminium, depending on construction | Higher-power LED applications where additional thermal performance may be needed. |
Ceramic | Varies by ceramic type; some materials are 20 W/m·K or higher | High-power or compact LED applications where the design calls for a ceramic substrate. |
Aluminium is used in many LED PCB applications because it can offer a practical balance of thermal performance and cost. An aluminium PCB typically has three layers: a copper circuit layer, a thin dielectric layer that provides electrical insulation while conducting heat, and an aluminium base. Each layer contributes to the board’s electrical and thermal performance.
Copper-core PCBs can also be used for LED applications and may provide higher thermal conductivity than aluminium, depending on the materials and construction. FR-4 can be suitable for lower-power LED applications, but it may not be appropriate where greater heat transfer is required.
We can help you choose the right aluminium PCB or aother board construction for your application, so you don’t pay for performance you don’t need.
How we manufacture LED PCBs:
We follow a set process when manufacturing LED PCBs to help ensure that the finished boards meet your requirements.
- DFM review – We review your Gerber files and check whether the design is suitable for production. If we identify potential issues, we’ll let you know.
- Material selection – As outlined above, it’s important to choose a PCB material that suits your application.
- Manufacturing – We manufacture your PCBs using our standard PCB manufacturing processes.
- Surface finish – Choose from HASL, lead-free HASL, ENIG, OSP or immersion silver. White solder mask may be suitable where board colour and reflectivity are design considerations.
- Testing and inspection – Your PCBs are tested and inspected under our quality processes. Our quality management system is certified to ISO 9001:2015.
- LED assembly – We also offer PCB assembly, including turnkey, partial turnkey and consignment assembly.
Aluminium PCB Applications
Things to remember when designing an LED PCB
Keep the following points in mind when designing your LED PCB:
- Space LEDs evenly where the design allows. This can help distribute heat across the board and maintain consistent light output.
- Make sure thermal vias and pads are designed to connect properly with the relevant copper layers. This can support heat transfer.
- If you’re using white solder mask, check that the silkscreen and surface finish remain suitable and visible for your design.
- Consider how the PCB will be installed—for example, whether it will be panelised or enclosed.
- Tell us about the environment in which your product will be used.
If you need help reviewing your layout, our PCB design and review service can help identify design and manufacturing considerations.
What are LED PCBs used for?
LED PCBs are used in many applications, including:
- Commercial lighting
- LED panels
- Downlights
- Street lights
- Automotive lighting
- Signage
- Plant-growing lights
- Emergency lighting
Why choose us to manufacture your LED PCBs?
We have been manufacturing PCBs since 2005. We are ISO 9001:2015 certified and use RoHS-compliant materials. We have no minimum order quantity and can offer lead times ranging from 24 hours to three weeks, depending on the project.
You’ll be assigned a UK-based engineer to help you throughout the process of designing your LED PCBs. We’ll check your Gerber files and provide a free DFM report.
To request a quote for your LED PCBs, contact us or call 0203 750 0201.
FREQUENTLY ASKED QUESTIONS
An LED PCB holds the LEDs and provides their electrical connections. Aluminium is often used as the base material to help transfer heat away from the LEDs.
LEDs produce heat during operation. Aluminium-based PCBs can help transfer that heat away from the LEDs. FR-4 has lower thermal conductivity, so it may be more suitable for lower-power LED applications.
Yes. We offer LED PCB assembly in the UK, including full turnkey and consignment options.
No. We can supply one PCB or larger production quantities.
Lead time depends on the complexity and quantity of your project. It can range from 24 hours to three weeks. We’ll confirm the lead time with your quote.
What finish should I use on my LED PCB?
The right finish depends on your application. ENIG and immersion silver are common options; lead-free HASL may be suitable if you want to reduce costs. White solder mask may be considered where reflectivity is important, but the best choice depends on the board design and application. We can advise you on a suitable finish.
